R-Stage Access Scaffold Components
Hop Up Bracket
To extend the Scaffolding System by cantilevering for an additional A, B or C board platform. |
Description |
Weight (kg) |
 |
A Board Hop Up Bracket |
2.3 |
A Board Hop Up Bracket |
5.8 |
A Board Hop Up Bracket |
9.5 |
|
Toe Board Bracket
Clamps to the standard with a captive wedge. |
Description |
Weight (kg) |
 |
Toe Board Bracket |
0.78 |
|
End Toe Board Bracket
Fits into 'V' locating lugs on the standard at the end of a platform of Scaffolding System. |
Description |
Weight (kg) |
 |
End Toe Board Bracket |
1.18 |
|
Tie Bar
For connecting the access brackets along the length of the platform of Scaffolding System. |
Description |
Weight (kg) |
 |
8'0" Tie Bar |
7.0 |
6'0" Tie Bar |
5.2 |
4'2" Tie Bar |
3.5 |
|
Batten
Steel platform batten spans between the transoms giving a non-slip level surface to Scaffolding System. |
Description |
Weight (kg) |
 |
8'0" Steel Batten |
14.8 |
6'0" Steel Batten |
12.8 |
4'2" Steel Batten |
10.9 |
|
Batten Clamp
For batten security at high wind conditions of Scaffolding System. |
Description |
Weight (kg) |
 |
Batten Clamp |
3.25 |
|
Internal Corner Filler
For use with two / three board stage bracket, for gap free internal corners of Scaffolding System
. |
Description |
Weight (kg) |
 |
3' x 3' Corner Filler |
11.2 |
3' x 5' Corner Filler |
15.1 |
|
Bridging Ledger 16'0"
Made from standard quality tube to span between two 8' bays to give clear access to Scaffolding System. |
Description |
Weight (kg) |
 |
16'0" Bridging Ledger |
32.0 |
|
Bridging Ledger 24'0"
Made from standard quality tube to span between three 8' bays to give clear access to Scaffolding System. |
Description |
Weight (kg) |
 |
24'0" Bridging Ledger |
57.0 |
|
Return Transom
Fixed to the inner and outer standard and placed over the first ledger of an adjacent 90° bay. Seating on one side for 3 or
5 numbers of steel or timber battens giving the same level decking on both Scaffolding System runs. |
Description |
Weight (kg) |
 |
4'2" Return Transom |
13.4 |
2'8" Return Transom |
8.8 |
2'6" Return Transom |
8.4 |
|
Diagonal Brace
The diagonal brace is used to the full height of the Scaffolding System in a longitudinal direction. |
Description |
Weight (kg) |
 |
12'0" (8' x 8'1 1/2" Bay) |
13.4 |
9'0" (6' x 6'6" Bay) |
10.6 |
6'0" (4'2" x 4'10 1/2" Bay) |
8.0 |
8' x 6'6" Bay |
11.9 |
Other sizes are available on request. |
|
Coupler Brace
The coupler brace is used when necessary across the Scaffolding System. |
Description |
Weight (kg) |
 |
8' x 6'6" Bay |
12.1 |
6' x 6'6" Bay |
10.7 |
Other sizes are available on request. |
|
Stage Bracket
To extend the Scaffolding System by cantilevering for an additional 1,2 or 3 board platform. |
Description |
Weight (kg) |
 |
1 Board Stage Bracket |
2.3 |
2 Board Stage Bracket |
5.8 |
3 Board Stage Bracket |
9.5 |